- Brightness: 500 Lumens
- Light Modes: Continuous & Momentary
- Run Time: 120 Minutes
- Bulb: LED
- Material: Reinforced Polymer (Charcoal Grey)
- Mounting: Quick Detach, Picatinny (1913 rail) rails.
- Weight: 113g (with battery)
- Bulb: Cree R5 LED
- Battery: 2 x CR123A (Included)
Manufacturer Website: http://www.inforce-mil.com/inforce-wmlx.html
The INFORCE WMLx is the next generation of the WML. It delivers 500 lumens of focused light from two lithium 123 batteries. It features active switching that allows the light to operate in dedicated full-function, or momentary only modes. The LED selection lever, similar to the one found on the WML, controls these distinctly different modes.
In standard mode, the INFORCE WMLx has a momentary function as long as the activation button is held for more than a half-second. Release the button and the light turns off. For constant on, tap the angled activation button and the light stays on solid.
The INFORCE WMLx has no low lumens feature, only 500-lumens high mode. For strobe, double tap the angled activation button and the light enters in non-repeating strobe mode. It bears noting that the strobe can be activated no matter which mode the WMLx is currently running in, whether that be momentary or constant, the strobe can always be activated with a double tap provided that the LED selection lever is in constant mode.
To deactivate the strobe, unscrew the bezel a quarter turn, hold the angled activation button, lock the bezel back in, continue holding the angled activation button for two seconds, then let it go. To bring strobe back, repeat the same procedure.
For momentary-only mode on the INFORCE WMLx, roll the LED selection lever to the rear and the light becomes a dedicated momentary-only light at 500 lumens . Press and hold the angled activation button and the light stays on. Release it and the light turns off.